XX  XX
 
Mini 0-10V Controller up to 254X254 chanels on 1 Cable, Better than Dali, S-BUS Enabled Trail Click
Both DIN-Rail Mount and Trail Click Mount, BUS Enabled, Cascadable. Good for Retrofit and for installations where DB size is Limited (Works for Both Wired S-BUS G4 and Wireless S-Wave enabled Networks) 1 Channel 0-10V Ballast controller. To dim your Fluorescent Tube Lights and save tube Lights energy also gives different mood lighting in the room for a more comfortable lighting for the human eyes. It can handle 30 Looped 0-10V Ballasts, Inclusive with 10A relay per channel. 220/110 VAC, 50-60Hz (Green operated supplied by 24VAC/30mA) output status LED indicator, network health, broadcast address button and Momentary channel button. Can be used in any location that require energy saving, intelligent control
 
0-10V 1ch Mini -TC  Ballast and Valve Control, Trail Click Built in 16A relay as cutoff or On-Off relay for any use. Can mount behind switch or DIN or free locate Small size Powerful and affoordable
 
Supply
80-240V, 50/60Hz Single Phase power consumption: 30mA
Outputs
1Relays x 10A Each
In1Areas (Fully Isolated)
0-10V outputs
Control IO
3 x Advanced RS485 S-BUS serial port links (both train & screw link types)
Upgrade IO
1 x mini USB port (to connect to special programming board)
User Controls
•front panel override switches, Includes ON/OFF/AUTO override switch for each channel
•LED status indicator/channel
•Diagnostic LED+ BROADCAST
•Device can be restored to
previous scene or designated
scene when power restore
Programming
•Advanced Software Configuration & Programming
Installation
•35mm DIN-Rail Mount Ready
•Wall Mount Ready (8P)
Compliance
CE Mark Low Voltage
CE Mark EMC
Internal Protection
•Over Heat Protection
•Over Load Protection
•BUS Rv. Polarity Protection
•BUS Short Circuit Protection
•Protection delay function (0-60 minutes).
Preset and Scenes
1X12 Built in Scenes, and1X4 Sequence Modes and Logics.
maximum operating time: 60
Minutes.Orderly startup delay function
in each channel. (0-25 seconds)
SBUS DC Supply
24VDC with flexible tolerance between 8-36VDC. Flexible ability to add power supply as to be needed any where
Supply Terminals
Line,1X Inputs 2.5mm2- 4mm2max conductor size
Output Terminals
10X OUT for each channel 1 x 4mm2max conductor size
Operating Environment
0º to 45ºC ambient temperature20% to 93% RH
Enclosure & Size
Polycarbonate, DIN-rail (8 Unit)
Dimensions
W46.06mmX23mm x H50mm