1Dimmer + 1Relay Trail Click Module is both DIN-Rail and trail Click Mount, Bus Enabled, Cascadable. Good for Retrofit and for Installations where DB size is Limited. (Works for Both Wired S-BUS G4 and Wireless S-Wave enabled Networks). Consists of: 2 Leading Edge Dimmer Channels 1A per Channel, and 1 ch. Relay 5A per channel. Built in 4Z Dry Inputs for Using with Normal Switches and NO/NC sec.
| Supply 80-230VAC, 50/60Hz 3-Lines power consumption: 20-30mA Outputs 3 Addressable Outputs : 1Dimmer x 1A 1Relays x 5A Input 4-Dry Input(volt Free) NC/NO(Internal Assignment enable using Software setup) Load Rating Range This Module is Meant to be used mainly with Low Current applications. Rating Guide: For relays: 12-30VDC= 6A 110VAC = 5A 220VAC = 5A For Dimmer: 1A(80-230VAC) Control IO 2 x Advanced RS485 S-BUS serial port links (train types) Upgrade IO 1 x mini USB port (to connect to special programming board) User Controls • LED status indicator/channel • Diagnostic LED+ BROADCAST Programming • Advanced Software Configuration & Programming | Compliance CE Mark EMC ROHs UL Listed Relays Inside Internal Protection • BUS Rv. Polarity Protection • BUS Short Circuit Protection • Over Load Protection Preset and scenes 3 x 12 build scenes SBUS DC Supply 24VDC with flexible tolerance between 8-36VDC. Flexible ability to add power supply as to be needed any where Power consumption: 15mA Installation • universal Mount Ready Operating Environment 0º to 45ºC ambient temperature 20% to 93% RH Enclosure material APS Polycarbonate, Dimensions & Weight W 54mm x L 46mm x H 31mm Packed weight 0.05 kg |